Daystar Filters 'Direct Connect'
Q34XGF and Q34X2D2 Plate Application Guide
Efficient configuration of Daystar on refractors of the F/7-F/9 range using Tele Vue 4X Powermate
Step 1: Separate the Tele Vue 4X Powermate in its BLACK mid-section.
Step 2: Install Q34XGF plate to GOLD side of Daystar Filter.
Note that the Q34XGF has only INTERNAL, FEMALE THREADS.
This will receive the MALE threads of the glass-filled Powermate barrel.
Step 3: Install Q34X2D2 plate to RED side of Daystar Filter.
Note that the Q34X2D2 has only EXTERNAL, MALE THREADS. This will receive the FEMALE threads of the empty drawtube barrel.
Step 4: Thead OPTICS end of Powermate to GOLD side of DayStar.
Thread EMPTY BARREL end of Powermate to RED side of DayStar.
NOTE: THREAD IS HARD TO ALIGN TO START THREADS. USE CARE ON ANGLE
Step 4: Assembly complete, the 4X and DayStar unit can be inserted into the telescope's 2" drawtube. Apply the assembly BEHIND the diagonal or focus will be hard to achieve.
DayStar Q34XGF and Q34X2D2 Plate SET
(Does not include Powermate)
$80.00
DayStar Q34XGF GOLD Side Plate
(Does not include Powermate)
$45.00
DayStar Q34X2D2 RED Side Plate
(Does not include Powermate)
$45.00
DayStar Filters LLC• 149 Northwest OO Highway • Warrensburg, MO 64093 - USA
Telephone: 866-680--6563 • service@daystarfilters.com • FAX: 1-866-791-0448
